Facebook Twitter Google+ Print

3M Poster Strips

3M Poster Strips Image
12 strips

Hold on strongly. Comes off cleanly. No damage to walls or posters. No staining walls. Poster Strips with Command adhesive.

UPC/PLU: 51131659889 ?

What is the Product's UPC Code?

Please enter the UPC found on the product package.

UPC Image Close
Community Rating:
  1. Instructions
  2. Product Alerts
Important: Follow instructions carefully. Save instructions for clean removal in the future. To Mount Poster: 1. Clean Surface: Use isopropyl rubbing alcohol, wipe lightly, let dry. Do not use household cleaners. 2. Apply Strip: Remove red Command adhesive liner. Apply to poster corners as shown. Press firmly. 3. Mount Poster: Remove black wall side liners from poster strips. Position poster and press firmly for 30 seconds. To Remove Poster: 1. Reveal Removal Tabs: Lift corner of poster to reveal tabs. 2. Grab removal tab. 3. Slowly: Slide the tab straight down against the wall stretching the strip at least 6 inches (15 cm) until poster releases from the wall. Repeat steps for additional strips. Never pull the strip out at an angle. Strip could break or damage the surface. Note: Apply to surfaces above 50 degrees F (10 degrees C). Adhesive could soften and lose adhesion above 105 degrees F (40 degrees C).
Do not use with delicate or paper wallpaper. May not adhere well to some vinyl wallpapers. Do not use for antiques, heirlooms, or other valuable or irreplaceable items.