For Use: Read safety information carefully before use. Retain instructions for future reference. 1. Ensure the control wheel on the back of the device is in the off position. To open, press down the button on the back of the device and pull. Ensure your fingers are not on the seam on the sides of the device. Insert 2 AA/LR6 batteries. Ensure the positive (+) and negative (-) terminals are aligned correctly. 2. Before inserting the aerosol refill, ensure the red lever inside the device is pushed up. Then insert the aerosol refill with the spray nozzle facing out. 3. Close the device. Direct the device away from your face and select desired fragrance intensity using the control wheel located at the back (low, medium, high). When activated, the device will spray after a delay of 15 seconds. If there's no spray after 15 seconds, switch off the device. A. Check the batteries are inserted correctly. B. Remove aerosol refill and push up red lever (see diagram number 2). C. If red light is flashing immediately after the first spray, the refill has not been identified as Air Wick refill and will not work in this device. 4. Directing the device away from your face, place the device where chosen. Ensure it is at least 6 feet from the floor level. 5. When the aerosol refill is nearly empty, the red light will flash rapidly and the device will soon stop working. Directing the device away from the face, switch the device to off position and repeat the operation of placing a new Air Wick refill device into the device.
Keep out of reach of children. Keep out of reach of children and pets. Read precautions on refill can before use. Only for use with Air Wick refills. Do not reuse batteries.